3
/8
Roof support tubes: Airdream Prestige DL roof support poles 2, Airdream Vision
DL 300 roof support poles 2 ; Airdream Vision DL 390 roof support poles 3 ;
MotoAir roof support poles 1
Inflate the tubes supplied to a pressure of 7-8psi. You will notice that Velcro is
attached on the end of each tube. Insert the poles into the centre part of the roof
for straight tubes, or alternatively curved part of the awning for curved tubes.
These tubes will strengthen the roof and enable you to obtain a better shape.
During calm weather you can remove these tubes and attach them to the front
tubes to make a veranda bar.
To give the awning the correct shape and stability we advise that all guy lines are
fitted and pegged correctly.
Suitability
The inflatable awning is designed for touring and weekend camping. During
severe storms we would advise you to dismantle the awning as a precaution.
The awning is not designed for permanent site camping or commercial use.
UV Deterioration
Airdream uses only top quality materials in the production of the Inflatable
awnings. However all coated polyester materials are subject to UV Deterioration
if exposed to long periods of direct sunlight. To avoid this problem try and camp
in a shaded area.
Condensation
Inflatable awnings are produced in Climatech material. This material contains a
high proportion of synthetic materials and under certain climatic conditions, such
as cool environment and high moisture, condensation can take place. This should
not be confused with leaking. The condensation can be vastly improved by
creating extra ventilation.