DOWN
FLAPS
UP
DOWN
FLAPS
UP
NOTES:
1.) IT MIGHT BE HELPFUL TO WIRE THE FPS-Plus-nt TO THE +12V or +24V DIAGRAMS BEFORE WIRING THE FLAP POSITION INDICATOR.
2.) OTHER OUTPUT SCALINGS ARE POSSIBLE TO INTERFACE WITH DIFFERENT POSITION INDICATORS. PLEASE CONSULT FACTORY.
GRN
BLK
To DIMMER
ORG
NO
WHT
RED
Digital Ind.
Ray Allen Co.
RP3
Ray Allen Co.
Analog Ind.
RP2
GRN
BLK
AIRCRAFT EXTRAS, INC.
FPS-Plus-nt Position Indicators
CONNECTION DIAGRAM
3/31/06 Rev. -
CONNECTION
20 ISO Motor PWR (12/24Vdc)
10 Do NOT connect
19 ISO Motor COMMON
15 Flap Motor Up Output
16 Flap Motor Down Output
17 Elev. Trim Motor Up Output
18 Elev. Trim Motor Dwn Output
11 Flap Position Out
12 Elev. Trim Pos Out
13 Do NOT connect
14 Do NOT connect
3 COMMON (GND)
6 Flap Down Butt In
7 Flap Up Button In
9 Elev. Trim Position In
5 Prog. Button In
8 Flap Position In
1 +24Vdc Input
2 +12Vdc Input
4 +5Vdc Output
MODE LED
JUMPER CONNECTIONS (FPS-Plus-nt, bottom side)
FLAP INDICATOR
OUTPUT, 0.12 to 1.2V
for RayAllen
LED Indicator
FLAPS
JUMPER CONNECTIONS (FPS-Plus-nt bottom side)
FLAP INDICATOR
OUTPUT, 0 to 6V
for RayAllen
Analog Indicator
FLAPS
THESE JUMPER POSITIONS
WILL SET UP THE FPS-PLUS
FOR A 0 to 6V OUTPUT
INTO THE ANALOG
POSITION INDICATORS
THESE JUMPER POSITIONS
WILL SET UP THE FPS-PLUS
FOR A 0.1V to 1.2V OUTPUT
INTO THE DIGITAL
POSITION INDICATORS
20 ISO Motor PWR (12/24Vdc)
10 Do NOT connect
19 ISO Motor COMMON
15 Flap Motor Up Output
16 Flap Motor Down Output
17 Elev. Trim Motor Up Output
18 Elev. Trim Motor Dwn Output
11 Flap Position Out
12 Elev. Trim Pos Out
13 Do NOT connect
14 Do NOT connect
3 COMMON (GND)
6 Flap Down Butt In
7 Flap Up Button In
9 Elev. Trim Position In
5 Prog. Button In
8 Flap Position In
1 +24Vdc Input
2 +12Vdc Input
4 +5Vdc Output
MODE LED
