SWING
How to Use Advanced Functions
Swing function
Airflow direction
LED DISPLAY
Press Swing button
The horizontal louver will swing up and down
automatically when pressing Swing button.
Press again to make it stop.
Each time you press the button, it will adjust
the louver by 6
°. Press the button until the
direction you prefer is reached.
Keep pressing this button more than 2 seconds,
the vertical louver swing function is activated.
(Model dependent)
SWING
2s
DIRCT
LED DISPLAY
LED DISPLAY
Keep pressing this button more than 5 seconds,
the indoor unit will display the actual room
temperature. Press more than 5 seconds again
will revert back to display the setting temperature.
Press this button to turn
on and turn off the display
on the indoor unit.
5s
Press LED button
Press this button more
than 5 seconds(some units)
Strona 54
FAN SPEED
2s
Keep pressing Fan button for more than 2 seconds
to activate/disable Silence function(some units).
Due to low frequency operation of compressor, it may result in insufficient cooling and heating
capacity. Press ON/OFF, Mode, Sleep, Turbo or Clean button while operating will cancel
silence function.
Silence function
FP function
The unit will operate at high fan speed (while
compressor on) with temperature automatically
set to 8 C/46 F.
2
Press this button 2 times during one second under HEAT Mode and setting temperature of
16 C/60 F or 20 C/68 F(for model RG51A10(2)/E, RG51B10(2)/E, RG51B10(2)/CE) to activate
FP function.
Press On/Off, Sleep, Mode, Fan and Temp. button while operating will cancel this function.
Note:
This function is for heat pump air conditioner only.
Strona 55