2
WARNING!
General Safety Procedures
• Improper installation, operation, or maintenance may contribute to conditions in the work
area or facility that could result in personal injury and product or property damage. Check
that all equipment is properly selected and sized for the intended use.
• Consult and comply with national and local codes relating to fire or explosion and all
other appropriate codes when determining the location and operation of this equipment.
• Safe and efficient operation of the unit depends on proper installation.
• Authorities with jurisdiction should be consulted before installing to verify local codes and
installation procedures. In the absence of such codes, install unit according to the National
Electric Code, NFPA No. 70-latest edition.
• A qualified installation and service agent must complete installation and service of this
equipment.
• DO NOT weld on / to pressure vessel or modify it in any way.
• DO NOT remove, modify, or adjust protective or safety devices.
• Lock out power supply and depressurize system before performing maintenance or service
work.
• DO NOT operate the equipment with the control panel door open.
Notice: For optimum performance, use only Aircel replacement parts.
This manual contains specific precautionary statements relative to worker safety.
Read thoroughly and comply as directed. Discuss the use and application of this
equipment with a representative. Instruct all personnel on safe use and maintenance
procedures. Understand and obey the following signal words used in this manual.
•
DANGER!
- indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
•
WARNING!
- indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
•
CAUTION!
- indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
•
Notice:
- used to address practices not related to personal injury.
Notice: For optimum performance, use only original equipment replacement parts.
Notice: For information and notes specific to a custom designed and built dryer, reference the
drawing package provided with the unit. See warranty on manual back cover for
custom engineered products.
Aircel
C
DP-Series Models 70 - 500
