V3RNIO & | User’s manual
2
OPTION B: Mounting on a Flight Panel
FOR STANDARD V3RNIO
To attach the V3RNIO to your flight panel, unscrew the six
front screws to remove the cover, as displayed below.
FOR
To attach the to your flight panel, unscrew the six
front screws and 4 bottom screws to remove the cover, as
displayed below.
2. HARDWARE SETUP
2.1 ATTACHING TO DESKTOP/FLIGHT PANEL
OPTION A: Mounting on a desktop
Use the four screws (C) and the provided Allen key (D) to attach
the clamp (B) to the V3RNIO/ as seen in the diagram
below. Place the V3RNIO/ on the surface it will rest
and tighten the knob (a) until you feel a strong resistance, as
shown in the diagrm below.
a
A 2mm Allen key (not provided) is needed to unscrew
the front screws of the V3RNIO/ cover.
A Phillips head screwdriver (not provided) is needed to
unscrew the bottom screws of the cover.
