23
10. REMOTE ASSISTANCE - SOLO-A USER'S MANUAL
10. REMOTE
ASSISTANCE
In case you need help from VirtualFly technical service, there is the
possibility to make a remote connection to your SOLO-A. For that, you
should do the next:
1. Connect a network cable to the (B) connector.
2. Turn off BAT switch.
3. Turn on your SOLO-A and wait until a screen like this appear on the
advertisement panel.
4. Press the AP key from radio stack and simultaneously ALT key (for a
second), wait until “Remote Session ON” message appear.
NOTICE: The remote software session takes about 20 seconds to
60 seconds to start.
• Take note of the ID code that appear on the VOR2 indicator, as
the next example:
5. Contact with Virtual Fly technical support service (info@virtual-fly.
com) to:
• Give us “ID” code.
• Schedule a remote session.
Once Virtual Fly technical support has finished the session, you should
reboot your
SOLO-A.
.
B
Summary of Contents for VirtualFly SOLO-A
Page 2: ......
Page 16: ...16 6 GPS GNS 530 SOLO A USER S MANUAL...
