Airbus Tactilon Dabat, User Manual

Page: 120 / 123

I M P O R T A N T S A F E T Y I N F O R M A T I O N
PS11750AENAB01 User Manual - Tactilon® Dabat
120/121
This document is the property of Airbus DS SLC and should not be copied or circulated without permission.
Using the device in an aircraft or at an airport may be prohibited. Follow any
restrictions. Wireless phones can cause interference in an aircraft. Airport
professionals using wireless phones should follow the special guidance and
instructions issued by their own organization.

Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere and
obey all signs and instructions. Potentially explosive atmospheres include areas where
you would normally be advised to turn off your vehicle engine. Sparks in such areas
could cause an explosion or fire resulting in bodily injury or even death. Switch off the
device at refuelling points such as near gas pumps at service stations. Observe
restrictions on the use of radio equipment in fuel depots, storage, and distribution
areas, chemical plants or where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often but not always clearly marked. They include
below deck on boats, chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), and areas where the air contains
chemicals or particles such as grain, dust or metal powders.
However, Airbus provides special Atex certified products that can be used in potentially
explosive gas areas. For more information on these products, please contact the
nearest authorised Airbus distributor.

Emergency calls
Important: Wireless phones, including this device, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless phone for essential
communications like medical emergencies.
To make an emergency call:
1. Ensure the device is switched on, in service and that the screen is unlocked.
2. Press the Home button icon as many times as needed to clear the display and return
to the start screen.
3. Launch the 3GPP Phone application.
4. Enter the emergency number and tap the call button.
5. Follow the received instructions before you disconnect the call.
Dabat_en_print.book Page 120 Mardi, 27. novembre 2018 5:08 17