10
Effects
(continued)
Parameter
Description
Value Range
Delay
Use the button in the upper-right corner of this section
to enable or disable delay.
Off, On
Time
Amount of time between the dry signal and the
delayed signal.
1/16 – 16/4
Mix
Wet/dry amount of the delay effect.
0–100%
L|R
Ratio
Reduces the delay
Time
in either the
Left
or
Right
stereo field. This is useful for creating offset, panned
delays.
50:100 – 100:100 –
100:50
Feedback
Amount of signal fed back into the delay line.
0–100%
Reso LP Freq
Low pass frequency for feedback resonance.
100 – 16000 Hz
Reso EQ Freq
Center frequency for feedback resonance.
100 – 16000 Hz
Reso EQ Gain
Amount of gain applied to the resonant frequency.
0–100%
Spring Reverb
Use the button in the upper-right corner of this section
to enable or disable the spring reverb effect.
Off, On
Pre-Delay
Length of time between dry signal and reverberated
signal.
0–250 ms
Time
Length of reverb tail.
1.00 – 10.00 s
Mix
Wet/dry amount of the reverb effect.
0–100%
Low Cut
Center frequency for reverb signal low-cut filter.
20–1000 Hz
Diffusion
Rate of increasing density of reverb reflections.
At lower settings, the sound of individual reflections is
more present.
At higher settings, reflections are more uniform.
0–100%
Width
Stereo width of reverb signal. Higher values give wider
stereo separation.
0–100%
