Air OPx-4, User Manual

Page: 15 / 28

15
FX1–3
(continued)
Parameter Description Value Range
Tremolo Sync Sync the modulation Rate to the Global Tempo
or turn Off to adjust Rate by Hz. Off, On
Rate Speed of the modulation.
When Sync is Off : 0.25 – 13.00 Hz
When Sync is On : 8/4, 6/4, 5/4, 4/4, 3/4, 1T, 2,
4D, 2T, 4, 8D, 4T, 8, 16D,
8T, 16
Depth Modulation depth of the tremolo effect. 0–100%
Sync Phase Adjusts the starting position of the modulation
waveform. -180 – 0 – +180
Shape Type of modulation wave. Sine, Sqr
Mode Type of effect applied. Trem, Pan
Delay Sync Sync the Delay to the Global Tempo or turn
Off to adjust Delay by milliseconds or seconds.
Off, On
Type Type of delay applied. Mono, Stereo, Cross
Delay Amount of time between the dry signal and the
delayed signal.
When Sync is Off : 1 ms – 4.00 s
When Sync is On : 16, 8T, 16D, 8, 4T, 8D, 4, 2T,
4D, 2, 1T, 3/4, 4/4, 5/4, 6/4,
7/4, 8/4
Feedback Amount of signal fed back into the delay line. 0–100%
Mix Wet/dry amount of the delay effect. 0–100%
L / R Ratio Reduces the delay Time in either the Left or
Right stereo field. This is useful for creating
offset, panned delays.
L 50:100 – R 100:50
Width Stereo width of the delay effect. 0–100%
Low Cut Center frequency for delay signal low-cut filter. 20.0 Hz – 1.0 kHz
High Cut Center frequency for delay signal high-cut filter. 1.00 kHz – 20.0 kHz