15
Effects
(continued)
Parameter
Description
Value
Range
Flavor
Use the button in the upper-left corner of this
section to enable or disable the flavor effect.
Off, On
Timbre
Selects an emulation type to color the sound.
Varies
Timbre
Depth
Amount of timbre emulation applied to the sound.
0–100%
Vinyl Distortion Amount of vinyl distortion noise applied to the
signal.
0–100%
Vinyl Noise
Amount of vinyl noise such as clicks and pops
applied to the signal.
0–100%
Flutter
Amount of speed fluctuation of the sound playback. 0–100%
Monofy
Reduces the stereo spread of the sound to mono.
0–100%
EQ
Use the button in the upper-left corner of this
section to enable or disable the EQ effect.
Off, On
Low
Amount of attenuation or boost applied to the low
frequency band.
-12 – 0 – +12 dB
Low Mid
Amount of attenuation or boost applied to the low-
mid frequency band.
-20 – 0 – +20 dB
High Mid
Amount of attenuation or boost applied to the high-
mid frequency band.
-20 – 0 – +20 dB
High
Amount of attenuation or boost applied to the high
frequency band.
-12 – 0 – +12 dB
Amp | Cab
Use the button in the upper-left corner to enable or
disable the amp/cab effect.
Off, On
Cab Model
Type of amplifier simulated.
D.I., Brit, 1x8”, 1x12”,
2x10”, 2x12”, 4x10”,
4x12”, 1x15” Bass, 4x10”
Bass, Radio
Drive
Amount of overdrive applied to the amp signal. 0–100%
Soft Clip
Amount of softening applied to the clipped signal to
decrease high-frequency harmonics and add
warmth.
0–100%
Mono/Stereo
Determines whether the simulation is mono or
stereo.
Mono, Stereo
High
Amount of high-range tone reduction or boost.
-100 – 0 – +100%
Mid
Amount of mid-range tone reduction or boost.
-100 – 0 – +100%
Bass
Amount of bass-range tone reduction or boost.
-100 – 0 – +100%
Volume
Output level of the amp signal.
-12.0 – 0.0 – +12.0 dB
