IDE Port Jumpers
IDE Enable/Disable
JP30
Enable on-board VL-Bus IDE port.
OPEN
(Default)
Disable on-board VL-Bus IDE port.
SHORT
VL-Bus IDE Recovery Time
JP2
1
JP2
2
JP2
3
Speed 0: High speed IDE hard disk.
(Default Setting)
2-3
2-3
2-3
Speed 1: Medium speed IDE hard disk.
1-2
2-3
2-3
Speed 2: Slow speed IDE hard disk.
2-3
1-2
2-3
Parallel Port Jumper
Parallel Port
JP32
Select interrupt line IRQ7 for Parallel port.
1-2
(Default)
Select interrupt line IRQ5 for Parallel port.
2-3
FLASH BIOS Jumper
FLASH BIOS Control
JP13
Disable FLASH (optional) programming.
This is normal operation.
OPEN
(Default)
Enable FLASH BIOS programming.
Contents of system board BIOS can be re-
programmed.
2-3
Page 8 586MI System Board User's Manual
