1. Choose "CHANGE PASSWORD" from the Setup Main Menu and
press <
Enter
>.
2. If this option has never been used, the screen will display the
following message.
Enter NEW Password:
If you want to disable the password option, just press <
Enter
> key
to return to the Main Menu.
3. If this option has been used to enter the password, the screen will
display the following message:
Enter Current Password:
Enter the current password (default is AMI) and follow the screen
instructions to change the password.
4. After you correctly enter the current password, the following message
appears prompting you for the new password.
Enter NEW Password:
5. Enter the new password and the following message appears:
Re-Enter NEW Password:
6. Re-enter the new password. If the password is mis-keyed, the
following error message appears:
ERROR, Press Any Key...
If the password is keyed in correctly the following confirmation
message appears:
NEW Password Installed
7. Press <
Esc
> to exit to the Main Menu.
AUTO DETECT HARD DISK
486SH System Board User's Manual Page 29