Air Vise and Workholding AirVice, Manual, Page: 5 / 12

4
SETUP OF YOUR AIR VISE
Your new Air Vise will come
ready for installation of the
pneumatic fittings. Install
the 90º elbow fitting until
tight.
The Air Vise will need to be mounted to a clean,
flat surface. Ensure
that you have
removed all chips and
fragments from past
work and use a solvent
to wipe down the
surface you intend on
mounting the vise to.
Using a fine sided
stone, check the table
for dents or burrs.
Once you’re sure
you’ve got a smooth,
clean surface, you’re
ready to mount the vise.