Page 15
Air Techniques, Inc.
Air Techniques, Inc.
Page 14
OPERATING INFORMATION
All
MOJAVE LT3
units can be operated from either the LCD touch screen or an optional remote
switch . The motor
Power
circuit breaker on the face of the compressor control box must be set in
the
ON
position whether using the touch screen or the optional remote switch . The
MOJAVE LT3
is designed for continuous operation . Operate the
MOJAVE LT3
by performing either the touch
screen or remote switch procedure below .
START UP BY TOUCH SCREEN
1 . Set the motor
Power
circuit breaker in the
ON
position .
2 . Observe that the color touch screen illuminates
and depress the blue
Standby
button .
3 . Observe that the
Standby
button changes to a
green
Running
button, that the unit is running and
the
Vacuum
widget shows increasing pressure .
START UP BY OPTIONAL REMOTE SWITCH
1 . Set the motor
Power
circuit breaker to the
ON
position .
2 . Observe that the when in
Standby
with no errors
the push button indicator is extinguished .
Note a:
Depending on the site installation, the
remote switch can be either a Bi-Color LED
6VDC switch (included) or a single LED 24
VDC switch.
Refer to the tables below for the LED
conditions for each switch during operation.
3 . Depress the push button switch and observe that
the associated indicator illuminates as listed
for the corresponding switch .
6V DC Bi-Color Green / Yellow Indicators (See Note a.)
Bi-Color LED Condition
Switch
Position Condition Description
None
Out
Standby, No errors
Solid Green
In
Running, No errors
Flashing Yellow
Out
Standby, Error present
Alternating Green / Yellow
In
Running, Error present
24V DC Green Indicator Only (See Note a.)
Green LED Condition
Switch
Position Condition Description
None
Out
Standby, No errors
Solid Green
In
Running, No errors
Flashing Green – Slow
Out
Standby, Error present
Green – Fast
In
Running, Error present
Optional Remote Control Panel
Control Panel
2
Color LCD Touch Screen Display
Control Panel
3
2
Pump Power
On/Off Switch and
Circuit Breaker
