Air Oasis iAdaptAir L, Manual

Page: 7 / 20

4
Operation
1. After connecting the power supply , you will hear one beep and the control
panel will illuminate for two seconds before entering standby mode.
2. Power button:
1st press turns on the unit, ionizer, UV light and low fan speed.
2nd press turns off the ionizer.
3rd press turns off the UV light.
4th press keeps the UV light off and turns ionizer on.
5th press switches the unit to standby mode.
3. Fan Speed: will cycle the fan speed to Low, Medium, or High.
4. Timer: Sets an auto off timer for two, four, or eight hours.
5. Child Lock/Sleep Mode: Press for three seconds until you hear a single
beep, signifying Child Lock/Sleep Mode has been activated. Once activated,
all settings will be locked and control panel lights will dim. Tap any button to
temporarily illuminate status icons to view locked settings. Pressing the Child
Lock/Sleep Mode button for three more seconds will unlock the control panel.
6. Smart Mode: Press to activate Smart Mode. While in Smart Mode, the fan
speed will automatically adjust according to your air quality. If the iAdaptAir
®
senses a reduction in air quality, the fan speed will automatically increase.
When the air quality improves, the fan speed will automatically decrease to
extend filter life.
Control Panel
• Feather touch controls are operated with a light touch of the finger.
• The backlit controls allow for easy operation even in dark conditions.