3
AHPCO
®
Cell Replacement
Step 1
CAUTION: Before attempting to service the Air Oasis 5000 unit, be sure
the power is off and unplugged.
DANGER - NEVER LOOK DIRECTLY AT ILLUMINATED AHPCO
®
CELL
Step 2
Pull the lamp connector off of the
AHPCO Cell. (2) Then pull to one
side. (3) Pull AHPCO
®
Cell at an
angle up and out of the bracket.
CAUTION
UV lamp may be hot and could
cause serious burns if not han-
dled properly. Please wait until
AHPCO
®
Cell has cooled to room
temperature to remove from unit.
WARNING
OPTICAL RADIATION EXPOSURE HAZARD
DO NOT ATTEMPT TO OPERATE UNIT WITHOUT
ALLUMINUM SHELL COVERING AHPCO CELL.
DO NOT ATTEMPT TO REPLACE AHPCO
CELL WITHOUT DISCONNECTING POWER.
PERMANENT EYE AND SKIN DAMAGE MAY RESULT.