Air-O-Swiss U700, Instructions For Use Manual

Page: 14 / 52

14
en
SAVE SETTINGS
The AIROSWISS U700 saves the last-used settings when
it is switched off. However, if the appliance is discon-
nected from the power supply for a few seconds, it will
start in the
operating mode.
AUTO MODE
In mode the humidification is controlled automati-
cally and the humidity is set to 50%. As soon as the hu-
midity or the humidifier is manually adjusted, however,
the appliance leaves
mode.
To return to mode, tap the symbol once.
The heater can be switched on or off without the appli-
ance leaving
mode. mode also remains ac-
tive when setting the timer.
CONTROLLING HUMIDITY
The humidity can be set between 30% and 70%. In the
“Co” setting (for “Continuous”), the humidifier runs re-
gardless of the measured humidity. This means it does
not switch off until the tank is empty or the appliance is
switched off.
1. Tap the symbol. The current humidity indicator
starts flashing.
2. While the indicator is flashing, tap the symbol again,
until the desired humidity is set.
The value is applied after a few seconds. The indicator
stops flashing.
REGULATE THE OUTPUT
1. Tap the symbol multiple times, until the desired
level appears on the display.
The symbol on the display shows which of the three levels
(low/medium/high) has been selected:
HUMIDITY AND HUMIDIFIER