Air-O-Swiss AOS W490, Instructions For Use Manual

Page: 13 / 18

19
en
Storage
Empty water tank. Clean Air Washer as described and
allow it to dry completely. Remove screw cap from the
water tank completely and store separately to preserve
the seal. Store Air Washer preferably in the original
packaging in a dry location that is not too hot.
Disposal
Pass the outdated Air Washer onto your specialized retailer
for professional disposal. You can find out about further
disposal possibilities from your municipality.
Spare parts and accessories
You can purchase spare parts from specialized
retailers and replace them on the Air Washer
yourself. Only original parts from the manufac-
turer can be used.
Repairs (36 – 38)
All further repairs may only be carried out from pro-
fessionals or the service department. This also applies
to a faulty power cord. Through improper repairs, consi-
derable danger for the operator can result and warranty
claims lapse.
Warranty
Warranty stipulations are determined by our national
representation.
• Contact your dealer with confidence if there is a
problem with the Air Washer despite strict quality
control.
• It is absolutely necessary to present proof of pur-
chase for warranty validity.
Legal information
The unit is CE compliant and adheres to the following guide-
lines:
• 2006/95/EG for electric safety
• 2004/108/EG for electromagnetic compatibility
• 2002/95/EG for the restriction of the use of certain
hazardous substances in electrical and electronic
equipment
• 2002/96/EG concerning waste electrical and
electronic equipment
Subject to technical modifications. The instructions for use
are protected by copyright.
Technical data
Electrical voltage 230 V / 50 Hz
Power consumption 18 W
Humidity output up to 300 g/h
Suitable for room sizes up to 50 m 2 / 125 m 3
Water capacity 7 Liter
Dimensions (mm) 336 x 323 x 407
Weight (empty) 6.0 kg
Operating noise < 25dB (A)
Accessories Ionic Silver Stick (ISS) A7017
CalcOff A7417
Troubleshooting
Problem Possible cause Was tun
No function Power cord not plugged in Plug the power cord into the socket.
Dragging noise Disc package not inserted in the bottom base
correctly
Insert the disc package correctly
No humidification/
Fan does not work
Disc package not inserted in the bottom base
correctly
Insert the disc package correctly
No water in the bottom base Refill water tank
Cleaning mode activated Switch off unit and switch on again