Starting the Dehumax
Before plugging the device on mains
power, check that the Dehumax is turned off.
•
Place the humidifier on the floor.
•
Plug the power cord to the mains power
and turn the device on.
•
The Dehumax dehumidifier is now ready
to use.
•
When first using the dehumidifier, operate
the unit continuously for 24 hours.
•
Check whether the filter is in place. Never
use the device without filter.
Control panel
Operating instructions
•
Press POWER
①
to turn on and off the
appliance. The LED
⑧
remains green
when Dehumax is on. The POWER pad
blinks 5 times per second when a humidity
or temperature sensor malfunction
occurs.
•
The humidity level can be set with
humidity control pads
③
and
④
and
digital display
⑧
. The humidity can be
set within a range of 35% RH (relative
humidity) to 85% RH in 5% increments.
•
Press
②
to select the desired operation
mode from Dehumidifying, Dryer,
Continuous dehumidifying and Hygro
Smart
©
function dehumidifying.
Control panel description
⑧
•
The digital panel shows the set humidity
level while setting.
•
Then it shows the actual room humidity
level.
•
Error codes displayed:
- E1: humidity sensor error. Unplug the unit
and plug it back in. If the error persists,
contact after sales service.
- E2: temperature sensor error. Unplug the
unit and plug it back in. If the error persists,
contact after sales service.
- P1: unit is defrosting. Allow time for the
unit to automatically defrost. The error will
clear after the unit self-defrosts.
- P2: the tank is full or not in the right
position. Empty the tank and/or replace it
in the right position.
- E3: Unit malfunction - Unplug the unit and
plug it back in. If the error persists, contact
after sales service.
Note: when more than one error occurs, the
error display order is: P2-E2-E1-P1-E3
Main functions
•
Dryer mode
The unit can make the MAX dehumidification
function when it is under the Dryer mode.
The fan speed is fixed at high fan speed. The
humidity level is automatically controlled
according to the actual room humidity.The
unit will quit dryer mode after a maximum 10
hours' operation.
Note : The Dryer mode must be operated in a
close room,do not open the door and window.
To make the best effective dehumidification,
please first dehydrate the wet clothes. Make
sure to direct airflow at the wet clothes. For
thick and heavy wet clothes may not get the
best effective dehumidification.
Caution : Do not cover the air outlet of the unit
with clothes. It may cause excessive heat, fire
or failure of unit. Do not place the wet clothes
on the top of the unit and do not make the
water drop into the unit. It may cause electric
shock,creepage or failure of unit.
Dehumax helps in preventing from moisture damage where books or valuables are stored, in
basements, etc.
1
2
3
4
5
6
7
8
Ion operation on
indicator light
High fan
indicator light
Timer on/off
indicator light
Bucket full
indicator light
Dryer operation
on indicator light
Continuous
operation on
indicator light
Hygro Smart
©
function
on indocator ight
Unit operation on
indicator light
10
