Air Live WH-9200AP, Quick Setup Manual, Page: 13 / 163

11
WH-9200AP
English
z
On the remote node device, register MAC ID of the original point. If there is mistake on MAC ID address,
the link will not be established, please check carefully the MAC ID and test before filed deployment.
z
To delete node information, please check the radio button of target node; then click on “DELETE
SELECTED” button.
z
Return to main page, the registered node information appears on the page.
Select 802.11a, b, or g mode
By default, the AP is set to 802.11g/b mode, running in 2.4GHz
spectrum. If you want to run it in 802.11a mode, you need to change
the settings. The AP cannot run in both 802.11a and 802.11g modes
simultaneously.
English