manualshive.com logo in svg

Air Live OD-2050HD, User Manual

Share
Download
Air Live OD-2050HD User Manual Download Page 28

4. Administrating the Device 

 
 
 
 

 

AirLive OD-2050HD User’s Manual

 

22

 

 

„

 

DDNS 

To enable or disable the DDNS service here. 

 

„

 

Server name 

Choose the built-in DDNS server. 

 

„

 

DDNS Host 

The domain name is applied of this device. 

 

„

 

User name 

The user name is used to log into DDNS. 

 

„

 

Password 

The password is used to log into DDNS. 

 

4.1.4   PPPoE 

PPPoE: Stands for Point to Point Protocol over Ethernet 

A standard builds on Ethernet and Point-to-Point network protocol. It allows your device 

with xDSL or cable connects with broadband network directly, then your device can dial up 

and get a dynamic IP address. For more PPPoE and Internet configuration, please consult 

your dealer or ISP. 

 

The device can directly connect to the xDSL, however, it should be setup on a LAN 

environment to program the PPPoE information first, and then connect to the xDSL 

modem. Power on again, then the device will dial on to the ISP connect to the WAN 

through the xDSL modem.   

Summary of Contents for OD-2050HD
























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands