MN-1033
5
fig. D.1
fig. D.2
fig. D.3
GETTING STARTED
1 . Raise the vehicle and support it in a way, using safety stands or equivalent, that the
axle can be safely lowered away from the frame . This will need to be done in order for
the air spring assembly to be put into position between the axle and frame (Fig . D .1) .
2 . Remove the jounce bumpers from under the frame, over the axle (Figs . D .2 & D .3) .
Use a wire brush and some penetrating oil on the jounce bumper to help in its removal. The
socket size for the nut is typically 15mm.
D. Installing the LoadLifter 7500 XL System
NOTE
LoadLifter 7500
XL
5
Summary of Contents for LoadLifter 7500 XL
Page 2: ......
