background image

CAUTION:

 FAILURE TO SECURE THE REFLECTOR SCREWS MAY RESULT IN A 

RATTLING OR HUMMING NOISE.

6.  Install the appropriate bulb (not included) specific to your model:
 

AK55L:

 Install a 100 watt maximum, type A19 medium base incandescent bulb (not 

included).

 

AKF55:

 Install an Air King model 26SBL or a compatible GU24 26 watt self ballasted 

lamp (not included).

7.  Close the light lens and secure in place by swinging back into position and snapping the 

tabs in place 

(Figure 13).

8.  Restore power and test your installation.

www.airkinglimited.com

210575917 Rev. C 1-13

4 of 8

SECTION 7

Use and Care

CAUTION:

 MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE 

STARTING INSTALLATION.

1.  Cleaning the Grill: Reverse the instructions in Section 6 Completing the Installation to 

remove grill. Use a mild detergent, such as dishwashing liquid, and dry with a soft cloth. 
NEVER USE ANY ABRASIVE PADS OR SCOURING POWDERS. Completely dry grill before 
reinstalling. Refer to instructions in Section 6 Completing the Installation, to reinstall grill.

2.  Cleaning the Fan Assembly: Wipe all parts with a dry cloth or gently vacuum the fan. 

NEVER IMMERSE ELECTRICAL PARTS IN WATER.

CAUTION:

 ALLOW BULB TO COOL BEFORE REPLACING.

3.  Changing the Light Bulb: Disconnect power to the unit. Open light lens by pushing in on 

the two tabs of light lens and pulling outward from lens. The lens will swing open on the 
connector bars. DO NOT remove the lens from the grill 

(Figure 13).

 

Incandescent Bulb (AK55L):

 Unscrew bulb from lamp holder and replace with a 100 

watt maximum, type A19 medium base incandescent bulb.

 

Fluorescent Bulb:

 Install an Air King model 26SBL or a compatible GU24 26 watt self 

ballasted lamp (not included) into the lamp holder by lining up the pins on the lamp base 
to the socket of the lamp holder and turning the lamp body clockwise until the lamp 
snaps into place and is firmly seated in the lamp holder.

 

Troubleshooting Guide

    Trouble 

 

Probable Cause 

 

Suggested Remedy

  1.  Fan does not operate when the switch is on. 

1a.  A fuse may be blown or a circuit tripped. 

1a.  Replace fuse or reset circuit breaker.

     

1b.  Connector plug from motor is not plugged in.  1b.  Turn off power to unit. Remove Grill and plug motor into receptacle

     

 

 

 

in housing. Restore power to unit.

     

1c.  Wiring is not connected properly. 

1c.  Turn off power to unit. Check that all wires are connected.

     

1d.  Motor has stopped operating. 

1d.  Replace motor.

  2.  Fan is operating, but air moves slower than normal. 

2. 

Obstruction in the exhaust ducting. 

2. 

Check for any obstructions in the ducting. The most common are bird nests

     

 

 

 

in the roof cap or wall cap where the fan exhausts to the outside.

  3.  Fan is operating louder than normal. 

3a.  Motor is loose. 

3a.  Turn off power to unit. Remove grill and check that all screws are fully

     

 

 

 

tightened. Restore power to unit.

     

3b.  Fan blade is hitting housing of unit. 

3b.  Call your dealer for service.

Figure 13

Connector 

Bar

Tabs

LIMITED WARRANTY

WHAT THIS WARRANTY COVERS:

 This product is warranted against defects in workmanship and/or materials. 

HOW LONG THIS WARRANTY LASTS:

 This warranty extends only to the original purchaser of the product and lasts for one (1) year from the date of original purchase or until the original 

purchaser of the product sells or transfers the product, whichever first occurs. 

WHAT AIR KING WILL DO:

 During the warranty period, Air King will, at its sole option, repair or replace any part or parts that prove to be defective or replace the whole product with the same 

or comparable model. 

WHAT THIS WARRANTY DOES NOT COVER:

 This warranty does not apply if the product was damaged or failed because of accident, improper handling or operation, shipping damage, abuse, 

misuse, unauthorized repairs made or attempted. This warranty does not cover shipping costs for the return of products to Air King for repair or replacement. Air King will pay return shipping 

charges from Air King following warranty repairs or replacement 

ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY), LAST ONE YEAR FROM THE DATE OF 

ORIGINAL PURCHASE OR UNTIL THE ORIGINAL PURCHASER OF THE PRODUCT SELLS OR TRANSFERS THE PRODUCT, WHICHEVER FIRST OCCURS AND IN NO EVENT SHALL AIR KING’S 

LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY INCLUDE (I) INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER, OR (II) REPLACMENT OR REPAIR 

OF ANY HOUSE FUSES, CIRCUIT BREAKERS OR RECEPTACLES. NOTWITHSTANDING ANYTHING TO THE CONTRARY, IN NO EVENT SHALL AIR KING’S LIABILITY UNDER ANY EXPRESS 

OR IMPLIED WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT AND ANY SUCH LIABILITY SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD.

Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these exclusions or 

limitations may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state and province to province. Proof of purchase is 

required before a warranty claim will be accepted. 

CUSTOMER SERVICE:

Toll-Free (800) 465-7300

Our Customer Service team is available to assist you with product questions, service center locations, and replacement parts. They can be reached Monday through Friday, 8am-4pm Eastern. 

Please have your model number available, as well as the type and style (located on the label inside of your product). 

Please do not return product to place of purchase.

www.airkinglimited.com

PARTS FOR DISCONTINUED, OBSOLETE AND CERTAIN OTHER PRODUCTS MAY NOT BE AVAILABLE. DUE TO SAFETY REASONS, MANY ELECTRONIC COMPONENTS AND MOST 

HEATER COMPONENTS ARE NOT AVAILABLE TO CONSUMERS FOR INSTALLATION OR REPLACEMENT.

Installer: 

 

Installation Date: 

Place of Purchase: 

 

Model Number: 

Summary of Contents for AK55L









Reviews: