Replace the Tank Cap by
firmly turning clockwise until
tight. Turn the Water Tank
upright and check the Tank
Cap for leaks. If any water
drips, remove the Tank Cap
and retighten. WARNING:
DO NOT place Water Tank on
the humidifier Base if the cap
is leaking.
When replacing the Water Tank
on the Base, lift the handle up
and align the notches on the
front of the Water Tank and
Base. Ensure the tank is firmly
seated.
Make sure the handle is
snapped back into place, then
turn the Water Tank upside
down and remove the Tank Cap
by turning it counter clockwise.
Remove Extension Nozzle and
Dual Directional Mist Nozzle
prior to filling the Water Tank.
1
Lift the Handle on top of the
Water to remove the humidifier
from the Base.
2
3
4
4
5
6
Filling The Water Tank
WARNING: Always unplug the unit before removing the Water Tank.
WARNING: DO NOT touch the water in the Base.
WARNING: NEVER fill the Water Tank from the top of the unit. Follow Water Tank
filling instructions in #4.
Filling the Water Tank:
Use clean, cool, tap water.
WARNING: DO NOT use
extremely cold water, since it may
temporarily reduce the mist output.
WARNING: NEVER fill with
hot/warm water or use additives
as this could damage the unit and
void the warranty
.
WARNING:
If you have hard tap water STOP
using tap water and use ONLY
filtered, distilled, cold boiled or
bottled water.
7
Attach the Dual Directional Mist Nozzle or Extension Nozzle & Dual Directional Mist Nozzle together
to the top of the Water Tank. To easily control the direction of the mist simply separate the Dual
Directional Mist Nozzle and position as desired-see photo above.
Extension Nozzle – To convert this unit from a Tabletop unit to Floor unit simply remove the Dual
Directional Mist Nozzle from the top of the Water Tank. Place the unit on your desired floor area and
insert the Extension Nozzle into the Top of the Water Tank. Then place the Dual Directional Nozzle on
the top of the Extension Nozzle. WARNING: Be sure the unit is unplugged and turned OFF when
changing the Nozzles
