4
Filling & Operating Instuctions
WARNING:
Always unplug the unit before filling.
WARNING: DO NOT
touch the water in the Water Reservoir.
WARNING: NEVER
fill the unit from the top, follow the filling directions below.
Filling the Aromatherapy Diffuser
1. Place the Aromatherapy Diffuser on a flat, level surface.
2. Remove the Exterior Base Cover by lifting straight up. (figure 2)
3. Use ONLY clean, cool tap water to fill the Water Reservoir. (figure 3)
WARNING: DO NOT
fill the Water Reservoir past the MAX Fill indicator.
WARNING: DO NOT
allow water to enter the Air Outlet as this could damage
the Diffuser.
4. Add 1-2 drops of Fragrance Oil to start. If a stronger scent is desired, add up to 6
drops of Fragrance Oil per 165ml of water (to the Max Fill indicator on unit). (figure 4)
5. Replace the Exterior Base Cover.
2
a
b
3
4
Operating the Aromatherapy Diffuser
1. Insert the Power Adaptor into to the unit. (figure a)
2. Plug the Power Adaptor into a standard (120V AC) electrical outlet.
3.
Power Button
•
Pressing the Power Button (figure b) once will start the mist and light function;
the default light function of the diffuser will loop through 5 colors in the
following order: red, green, blue, purple, white.
• Pressing the Power Button twice
will fix the unit on one color.
• Pressing the button a third
time will turn off the light.
• Pressing the button a fourth time will
stop the mist and turn the unit off.
4.
Auto Safety Shut Off
-
When the water
in the Diffuser is low, the unit will
automatically shut off and a red light
will flash for 30 seconds to indicate it
is time to refill.
Summary of Contents for RevitaSpa RS-L305A
Page 11: ...RevitaSpa ...
