5
Product Overview
Setting Up
Step 1:
Place the vaporizer on a flat surface and in a suitably large area with at least 50 cm of open
space around the machine.
Step 2:
Fill the fluid tank with Air Guard Antibacterial Solution.
Step 3:
Connect the machine to a suitably rated power supply. To determine the power requirement
for the machine refer to the label on the back of the machine.
Always connect the machine to a protected circuit and ensure it is properly grounded to
avoid risk of electrocution.
Step 4:
Turn on the machine and allow it to heat up, while the machine is heating up the LED status
light on push button will flash. Heat up takes approximately 2 minutes. Once machine reach
operating temperature, the LED status light will turn solid.
Step 5:
To start making fog, press the push button located on the handle. Press the push botton
again to stop
Step 6:
To turn off the machine, put the power switch to
OFF
position.
Wireless receiver
(antenna)
Manual ON/OFF
switch
Fluid tank
Tank cap
Power Inlet
cord
Power switch
Summary of Contents for AG-800X
Page 1: ...1 AG 800X Antibacterial Vaporizer USER MANUAL ENGLISH 中文 ...
Page 2: ...2 ...
Page 14: ...14 ...
Page 15: ...15 ...
