9
Manuel A&S 200 -
Smell detector update
If the air quality indicator remains red while the engine is off, it may be necessary to
reset the smell detector memory:
1-
After unplugging the unit for 20 seconds, plug it back in, turn it on, and press the
"ANION" button.
2-
Let the purifier run for 15 seconds then start again the operation.
Malfunctions
For any questions that are not covered in this manual, a dedicated service is
available via our website at:
The appliance does not start:
Verify the power supply.
The volume of air produced seems low:
Verify the cleanliness of the filters.
Make sure that the plastic protection films of the filters have been removed.
An alarm rings:
The water tank is empty.
Despite a long running time, the air quality does not improve:
Replace the filters.
