2
Unpacking & Installation Instructions
Remove the outer box and inspect for damage. Report all damage immediately to your carrier. If
special setup instructions are required, they will be taped to the outside of the equipment or in the
“Operating” section of this manual.
Inspect all of the packing material for small parts before discarding packaging material. Report
all damage to Air-Care immediately. Any attempt at repairing damages may void warranty.
Check that all parts are present (See Pages 6-7)
1.
COBRA-5 variable speed motor drive unit.
2.
Flexible drive cable, 3/8” core by 35 feet long.
3.
Flex-E-Bristle Brush, for use in 4” to 18” diameter air ducts.
4.
Three position remote control switch with 15-foot cable. (Fwd-OFF-Rev)
5.
9 foot AC power cable.
6.
Commercial Option (12”-36” diameter Flex-E-Bristle Brush.)
7.
Dryer Duct Options (5/16” cable, 4” brush, Nest Claw, etc)
Safety Precautions:
Always use safe and common sense precautions when working with Air-Care equipment. Do
not block walkways with equipment, and remove delicate and breakable articles from the
immediate work area. The following are precautions that should be reviewed by all persons who
will be involved in the cleaning activity.
•
There are no user serviceable components in the COBRA-5; only trained technicians should
attempt to make internal repairs on this equipment.
•
Never use the COBRA-5 in a wet environment.
•
Always turn off the main power switch on the COBRA-5 panel when the brush and cable are
laid down to prevent injury if the “FWD-OFF-REV” switch is accidentally activated.
•
Be sure all power cords and electrical extensions are rated to meet or exceed the original Air-
Care power cord spec’s, and inspect AC power plugs to be sure the ground pin is in place.
•
Never connect power to Air-Care equipment unless all covers, and safety shields are in place.
Mechanical and electrical parts could activate and cause injury.
•
Never allow anyone but a properly trained technician to use Air-Care equipment or cleaning
products.
•
All Air-Care equipment is designed for US standard 115 volt, 60 Hz AC. Most Air-Care
equipment can be special ordered to meet other worldwide standards for a reasonable price
and delivery schedule. Always check the specifications on the Equipment before connecting
electrical power to Air-Care equipment.
•
Keep the cable clear of breakable objects as it can flip and twist during higher torque
applications.
•
Turn off main power switch when removing or replacing the Flex-E-Bristle Brush.
If you have questions about the safe use of any Air-Care product, call 702-454-5515
Equipment Specifications and part numbers are subject to and change without notice.
