Switching the camera on
Pressing the SW2 when the LCD is blank
will power on the camera. The camera will
automatically power off after 30 seconds
of inactivity. The LCD indicates the
camera mode either "Lr" for low resolution
(QVGA images) or "Hr" for high resolu-
tion(VGA images). The LCD then displays
the number of pictures you have
remaining.
Taking a picture
Press the shutter button to take a picture.
A high pitched beep indicates that the
picture was taken successfully and the
counter will decrease accordingly. A low
beep indicates insufficient light to take a
picture. A series of beeps is an indication
that the camera is full.
Press Sw2
LCD
will be light up
Additional features
Pressing the mode switch repeatedly cycles through additional features as
displayed on the LCD. When a given feature is displayed it may be selected
by pressing the shutter button. If an option is not selected within 5 seconds
the display will revert back to the number of available pictures.
Press Sw1 to take a picture
Press SW2 to change features
Features will be displayed
Press SW1 to select mode
.. 8 ..
