Aiphone MASTER STATION AI-MS900 Instruction Manual Download Page 10

10

8.4. Conversation Method

There are three different conversation methods possible when the master station is used. The conversation
method is determined by the other party's station type and handset use. 

(1)

Voice-operated switching conversation

("VOX" in

the table below)
When both parties are talking coincidentally, the
master station's (telephone's) party voice is
transmitted to the substation. If the master station's
party stops talking, the substation's party voice can be
heard at the master station.

(2)

"Press-to-talk" control conversation

("PTT" in the

table below)
The [PTT] key is pressed to talk, and released to
listen.

(3)

Duplex conversation

Similar to the method of a standard telephone. 

The following table shows the conversation modes for all of the various station combinations.

Quick reference of conversation methods 

VOX:

Voice-operated switching conversation

PTT:

"Press-to-talk" control conversation

Duplex: Simultaneous conversation

One-way conversation

One-way conversation

Substation

Master station

Telephone

Handset off-hook

Handset on-hook

Substation

Master Station

Off-hook

On-hook

VOX/PTT

PTT

Duplex

Duplex

PTT

Telephone

VOX

Duplex

VOX

Duplex

One-way conversation

PTT

Simultaneous conversation

Summary of Contents for MASTER STATION AI-MS900

















Reviews: