LE-B
n Selective Call Door Entry Stations
- 23 -
ARCHITECTS/ENGINEERS’ SPECIFICATIONS:
The intercom system shall be of an open voice, selective
calling type with the ability for two-way communication with
the specified inside stations.
Entry station shall be available with 2, 4, 6, or 10 call buttons,
able to selectively call to the following models of inside master
stations: C-ML/A, LEM-1DL/C, and LEF-series master
stations.
Entry panel shall be flush mount with aluminum faceplate,
equipped with call buttons and directory strips.
SPECIAL ORDER PRODUCTS:
Entry Stations
LE-B2
2-call Door entry station
LE-B4
4-call Door entry station
LE-B6
6-call Door entry station
LE-B10
10-call Door entry station
Inside Stations
LEM-1DL/C
Master station with manual
OFF button for one entry
Wall or desk mount
(Multiple units OK, each
w/PT-1210N)
LEF-3L
3-call master with selective
door release (multiple masters OK)
STANDARD PRODUCTS:
Single Entry Stations
LE-D
Door station, surface mount
LE-DA
Door station, flush mt. stainless steel
Inside Stations
C-ML/A
Master station with automatic time out
LEF-5
5-call master with selective dr. release
LEF-10
10-call master with selective dr. rel.
Accessories
SKK-620
6V DC power supply, 1 per C-ML/A
PT-1210N
12V AC transformer, 1 per LEM-1DL/C
PS-12C
12V DC power supply, 1 per system
DAK-2S
Dual master kit. Included with C-ML/A
master stations.
LE-B2,4,6,10 (2)
SYSTEM LAYOUT EXAMPLE:
2
2
2
2
PT-1210N
SKK-620
SKK-620
LE-B4
C-ML/A
C-ML/A
LEM-1DL/C
When using C-ML/A or LEM-1DL/C master stations, each
station must be powered independently with its own power
source. Two room stations with separate power supplies can
be used together with the LEM-1DL/C master stations. A
second C-ML/A can be used, along with the DAK-2S dual
master adaptor kit and separate power supplies.
The system used with the LEF system shall have the
capability of adding individual door stations and multiple
master stations.
System shall be manufactured by Aiphone.
PT-1210N
LEM-1DL/C
NOTE:
Wiring for door strike and power
source for strike not shown.
Run separate 2 conductor wire from
master to door strike and power.