3
MOUNTING
5
OPERATIONS
4
WIRING
AIPHONE CO., LTD., NAGOYA, JAPAN
AIPHONE CORPORATION, BELLEVUE, WA, USA
AIPHONE S.A.S., LISSES-EVRY, FRANCE
- 2 -
WARRANTY
Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period
of one year after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective
upon which examination shall disclose to be defective and under warranty. Aiphone reserves unto itself the sole right to make
the final decision whether there is a defect in materials and/or workmanship; and whether or not the product is within the
warranty. This warranty shall not apply to any Aiphone product which has been subject to misuse, neglect, accident, power
surge, or to use in violation of instructions furnished, nor extended to units which have been repaired or altered outside of the
factory. This warranty does not cover batteries or damage caused by batteries used in connection with the product. This
warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by Aiphone.
Aiphone will not be responsible for any costs incurred involving on site service calls. Aiphone will not provide compensation for
any loss or damage incurred by the breakdown or malfunction of its products during use, or for any consequent inconvenience
or losses that may result.
Printed in Vietnam(E)
IER-2-I(E) 0709A
1. Connect a pair of wires to screw terminals on back.
2. Attach IER-2 unit to wall or single-gang box with
supplied screws.
3. For surface-wall mounting, run the cable either from
top or bottom of the unit.
Clean IER-2 unit with a soft cloth dampened with
neutral household cleanser. Never use any abrasive
cleaner or cloth.
. Unit housing: Plastic
. Wiring: 2 wires, non-polarized to an inside station
(master or sub).
. Dimensions:120H x 88W x 29D (mm).
4-3/4"H x 3-1/2"W x 1-1/8"D.
. Weight: 150g (0.33 lbs.).
Adjusting call tone volume
Cleaning
IER-2 is not a weather-resistant type. Do not install
outdoors.
Mounting location
6
TECHNICAL PRECAUTIONS
When call tone sounds, there is no communication.
To reply, come to the inside station.
6
TECHNICAL PRECAUTIONS
7
SPECIFICATIONS
(IER-2)
Remove
Back view
(top, right)
.
Make a cable inlet hole in the top.
http://www.aiphone.net/
Sinlge-gang box
IER-2
Screw (x2)
83.5mm
(3-5/16")
. Single-gang wall mounting . Surface-wall mounting
Wall
IER-2
Wood
screw (x2)
x
x
IER-2
Connecting terminals may vary by intercom station.
Refer to the Manual packed with the intercom station.
Intercom
master or
sub station
1
E
Non-polarized
HIGH
MEDIUM
LOW
AIPHONE
IER-2
Connecting
cable
Connecting
cable