background image

WARRANTY

REGULATIONS

Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of 2 
years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which 
examination shall disclose to be defective and under warranty. Aiphone reserves unto itself the sole right to make the final decision 
whether there is a defect in materials and/or workmanship; and whether or not the product is within the warranty. This warranty shall 
not apply to any Aiphone product which has been subject to misuse, neglect, accident, power surge, or to use in violation of 
instructions furnished, nor extended to units which have been repaired or altered outside of the factory. This warranty does not cover 
batteries or damage caused by batteries used in connection with the unit. This warranty covers bench repairs only, and any repairs must 
be made at the shop or place designated in writing by Aiphone. This warranty is limited to the standard specifications listed in the 
operation manual. This warranty does not cover any supplementary function of a third party product that is added by users or suppliers. 
Please note that any damage or other issues caused by failure of function or interconnection with Aiphone products is also not covered 
by this warranty. Aiphone will not be responsible for any costs incurred involving on site service calls. Aiphone will not provide 
compensation for any loss or damage incurred by the breakdown or malfunction of its products during use, or for any consequent 
inconvenience or losses that may result.

AIPHONE CO., LTD., NAGOYA, JAPAN

http://www.aiphone.net/

Issue Date: Dec. 2016

FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not 
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired 
operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

INDUSTRY CANADA
CAN ICES-3 (B)/NMB-3(B)

WEEE

The object area of 

 is the EU.

Summary of Contents for GT-1C7









Reviews: