- 3 -
1
When a call is received from an entrance station or guard station,
a call tone sounds.
• The Tone off LED will
flash.
* If there is no response, the
call ends after the call
duration has elapsed.
2
Press the TALK button once to answer the call.
• The Tone off LED will
turn on.
* Enable push-to-talk communication by pressing the TALK button for
one second or more during hands-free communication. (For push-to-
talk communication, press the TALK button to speak, and release to
listen.)
3
Press the TALK button once to end communication.
* Communication ends automatically after approximately one minute.
2
OPERATION
Answering a call
2-1
Calling from the doorbell button
2-2
1
When receiving a call from a doorbell button, a call tone will
sound for the duration of the button being pressed.
• Call tone is different than that from the entrance station.
(Communication is not possible.)
* Available depending on the equipment used in the system.
Door release
2-3
1
Press
the
door release button while in communication with
the entrance station.
2
Door release is activated at the entrance station.
* Available depending on the equipment used in the system.
NOTE:
Duration of door release activation can be controlled by the
entrance panel audio module, or by the door release system that is
used.
Turning the entrance light on when a light is installed in the common
area.
1
Press
the guard station call/light button once during entrance
station calling or communication.
2
The light at the entrance will only turn on for the preset time
duration.
Light control
2-4
* Available depending on the equipment used in the system.
NOTE:
This function is not available if a surveillance camera is installed in
the common area.