- 2 -
General Prohibitions
General Precautions
Prohibition to Dismantle the Unit
Prohibition on Subjecting the Unit to Water
WARNING
(Negligence could result in death or serious injury.)
1. Do not dismantle or alter the unit. Fire or electric shock could result.
2. The unit must be installed and wired by a qualified technician.
3. Do not connect any non-specified power source to the +, - terminals, and do not
install two power supplies in parallel to a single input. Fire, damage to the unit,
or system malfunction could result.
4. Keep the unit away from water or any other liquid. Fire or electric shock could
result.
5. Do not connect any terminal on the unit to AC power lines. Fire or electric
shock could result.
6. Do not put any metal or flammable material into the unit through the openings.
Fire, electric shock, or unit trouble could result.
7. Do not install or make any wire terminations while the lift or any other systems
are powered on. It can cause electrical shock, damage, or malfunction to the
other systems.
8. When checking the operation of the lift or other systems, ensure the safety of
others in the surrounding area before starting. Failure to do so could cause an
accident.
CAUTION
(Negligence could result in injury to people or damage to property.)
1. Do not install or make any wire terminations while power supply is plugged in.
It can cause electrical shock or damage to the unit.
2. Before turning on power, make sure wires are not crossed or shorted. Fire or
electric shock could result.
3. Do not put anything on or cover the unit with cloth, etc. Fire or unit trouble
could result.
4. For DC powered systems, use Aiphone power supply model specified with
system. If non-specified product is used, fire or malfunction could result.
5. Do not install the unit in any of the following locations. Fire, electric shock, or
unit trouble could result.
∗
Places under direct sunlight, or near heating equipment that varies in
temperature.
∗
Places subject to dust, oil, chemicals, hydrogen sulfide (hot spring).
∗
Places subject to moisture and humidity extremes, such as bathroom, cellar,
greenhouse, etc.
∗
Places where the temperature is quite low, such as inside a refrigerated area or
in front of air-conditioner.
∗
Places subject to steam or smoke (near heating or cooking surfaces).
∗
Where noise generating devices such as dimmer switches, invertor electrical
appliances, are closeby.
6. When mounting the unit on wall, install the unit in a convenient location, but not
where it could be jarred or bumped. Injury could result.
GENERAL PRECAUTIONS
1. This unit is for indoor use only. Do not use outdoors.
2. As to other systems used with this device, such as the lift, comply with the
Manufacturer's Specifications and Warranty conditions.
3. The unit turns inoperative during power failure.
4. Keep the intercom wires more than 30 cm (12 inches) away from AC 100-240 V
lines, particularly AC lines for invertor electrical appliances. Noise and
malfunction could result.
PRECAUTIONS
1 SYSTEM CONFIGURATION
System Configuration
3
Wiring Distance
3
2 CONTENTS
Contents
4
3 NAMES
Names
4
4 MOUNTING
Mounting
5
5 WIRING
Wiring
6
6 SETTING UP
Setup tool
8
Lift Control 1
9
Lift Control 2
9
Data transfer
9
Combine Data
10
7 OPERATIONS
Residential Station or Security Guard Station Door Release
10
Automatic Entry (Doctor Call) Option
10
8 TECHNICAL PRECAUTIONS
Technical precautions
11
9 SPECIFICATIONS
Specifications
11
