AiP ABA-001IR, User Manual, Page: 9 / 79

SWIR Area Camera Series User’s Manual
(OM170000021A)
- 9 -
2. Before using this camera
2.1. In case of a GigE camera
2.1.1. Software to be needed
The Camera uses Gigabit Ethernet interface and this interface conforms to GigE Vision®
、
GenICam TM
specifications.
Therefore, SDK available in the market may be used to operate camera but the connectivity with other
SDKs is not confirmed yet.
In this operation manual, the gigabit Ethernet interface uses SDK-TransFlyer (Type:AZP-ACAPTF-01) for
image capturing and controlling the camera.
The plat form required to use GigE Vision Network
Network Interface Card Gigabit Ethernet AvalData APX-3404, Intel PRO/1000 MT
Jumbo frame Card with MTU of more than 9000 byte
Note
To use the software for the third party available in the market is now investigating.
The plat form required foer the third party GigE Vision software
GenICam™ GenApi version 2.4 AcquisitionControl
FileAccess: firmware, LUT, FFC, configuration data, upload and
download
GenICam™ XML schema version 1.1
GigE Vision® version 1.2 GigE Vision®
GenICam™ XML camera description file The camera should has XML file inside the camera.
2.1.2. Image capturing and settings by using TransFlyer SDK
Aval Data, the TransFlyer can quickly capture the image and make necessary settings to operate the
camera. The TransFlyer TSight viewer can the capturing the image and setting the camera easier and the
TransFlyer TConfigurator has the network setting and remote update functions.
TransFlyer TSight Viewer TConfigurator Network and update