aion Gladiator Dual Drive, Manual

Page: 8 / 12

GLADIATOR DUAL DRIVE 8
x: -1.725, y: +1.14
ø9/32”
x: -0.575, y: +1.14
ø9/32”
x: +0.575, y: +1.14
ø9/32”
x: +1.725, y: +1.14
ø9/32”
x: -1.725, y: -0.01
ø9/32”
x: +1.725, y: -0.01
ø9/32”
x: +1.60, y: -1.36
ø15/32”
x: -1.60, y: -1.36
ø15/32”
x: -0.825, y: -1.36
ø5/16”
x: +0.825, y: -1.36
ø5/16”
CENTER (0,0)
ø7/16”
1/2”
(12.7mm)
1/2”
(12.7mm)
0.80”
(20.3mm)
1/2”
(12.7mm)
1.60”
(40.6mm)
1.60”
(40.6mm)
ø3/8” ø3/8”
ø7/16”
0.80”
(20.3mm)
ø1/2”
RETURN OUTPUT INPUT
LOOP
SEND
LOOP
DC
VOLUME (B) DRIVE (B) DRIVE (A) VOLUME (A)
TONE (A) TONE (B) EQ (B) EQ (A)
CHANNEL B CHANNEL A
ø1/4” ø1/4”
x: -0.575, y: -0.01 x: +0.575, y: -0.01
DRILL TEMPLATE
Cut out this drill template, fold the edges and tape it to the enclosure. Before drilling, it’s recommended
to first use a center punch for each of the holes to help guide the drill bit.
Ensure that this template is printed at 100% or “Actual Size”. You can double-check this by measuring
the scale on the printed page.
LED hole drill size
assumes the use of a 5mm LED bezel , available from several parts suppliers. Adjust
size accordingly if using something different, such as a 3mm bezel, a plastic bezel, or just a plain LED.
0 1 2
CM
0 1
INCH