Z E U S
QUICK-START GUIDE
Getting started
1
Cut straps
3
Lift box + remove packaging
2
Remove all four plastic tabs
Insert power cable in back, switch on
9
Unwrap filament and feed through tube
8
Press front on button for 1 second
Open door by lifting up and back
6
Place turnable 3 pins facing down
5
Remove interior packaging
4
7
Remove
test printout
10
Wind excess back onto spool
12
Press park button
11
Press control button
Select a file
18
Lift glass plate then remove printout
17
Select print
Feed filament all the way down
15
Press print to access files
14
Prep plate with thin layer of glue
13
16
Squeeze tabs with
thumb and index
NB: “Box” test file print time:
> 8 mins
A
4
Recommended: start with a test
