9
System integration
Installing the Power Supply Unit
1) The air inlet of the Power Supply Unit (PSU) must NOT be facing the chassis wall !
The air inlet of the PSU must be free from obstructions, to ensure proper airflow for cooling.
2) Mount the PSU with 4 screws (S1) to the chassis.
3) Remove the Side Panel (SP) to get access to the backside of the motherboard plate.
The motherboard plate offers 3 openings (A, B, C ) to guide and hide cables at its backside.
4) For mounting cables, the backside of the motherboard plate offers 22 Mounting Loops (ML).
With the use of Tie-wraps (W1) cables can be attached to these loops.
Installing the motherboard
1) Please read the manual of your motherboard for the location of the motherboard mounting holes.
2) Use the Motherboard Mounting Standoff Tool (T1) to screw the Motherboard Mounting Standoffs (M1)
accordingly to the chassis motherboard plate.
3) Place the motherboard in the chassis and mount it with screws (S3) to the Motherboard Mounting Standoffs.
M1
S3
S1
W1
T1
ML
SP
Summary of Contents for DRN-STN
Page 1: ......
