AIMS Power LFP24V400A, Instruction Manual

Page: 7 / 24

AIMS Power www.aimscorp.net
- 7 -
2 Product Introduction
2.1 General Information
This battery is packed with power and delivers efficient power for battery systems requiring large amounts
of power at 24 or 48 Volt. The AIMS Power 24V 400 amp or 48V 200 amp has large amp capacity in one
battery and eliminates the need for multiple batteries without losing amperage. Compared to other battery
technologies, this battery delivers large amounts of power, at half the weight and provides up to 8 times
more cycles. Loaded with automatic safety features, such as a Battery Management System (BMS), which
maintains individual cell integrity, low and high voltage protections and temperature management. The
battery also uses automatic cell balancing, requires almost no maintenance and includes RS485 and CAN
monitoring.
2.2 Product Features
Up to 8 times more cycles compared to other battery technologies
3500 cycles at 80% DoD, 6000 cycles at 60% DoD
Short circuit protection
Automatic low voltage shutdown
Over charge protection
Over discharge protection
Mount in any orientation
Multiple batteries: 10 batteries in parallel maximum
Automatic cell balancing
High output current for inverters
Battery status LED located on the front of the battery displays SOC percentage
RS485 & CAN ports
Power switch & Remote ON/OFF
Built in Battery Management System (BMS)
RoHS compliant
IP21
Reverse polarity protection (caution)
No venting or gassing
BMS temperature protection
Battery Management System. The built in BMS is a central hub inside the battery that maintains constant
voltage, current and temperature. The BMS allows for maximum charging capacity for faster charging and
efficient discharging. It also communicates with the desktop monitoring software via the RS485 or CAN
port.