c
Insert battery (5) with the positive end (+) toward the
battery cap (4) as seen in Fig. 1.
CAUTION:
Check that the o-ring on the battery cap (4)
is in position and in good condition to ensure there is no
water leakage into the battery compartment.
d
Tighten the battery cap (4). When resistance is
encountered, proceed to tighten until the battery cap (4)
is fully tightened.
NOTE:
For long term storage of the sight, remove the
battery.
2.2
Turn ON / OFF and adjust red dot intensity
•
Press any of the push-buttons (1)
or
to turn
the sight
ON
.
NOTE:
The sight will always turn
ON
at setting 7 of 10.
• Press
to increase red dot intensity.
• Press
to decrease red dot intensity.
• Hold
to turn the sight
OFF
.
NOTE:
Intensity setting 1 - 4 are intended for use with
NVD and intensity setting 5 - 10 for use in daylight.
Summary of Contents for Duty RDS
Page 1: ...Duty RDS User manual ...
