1
2.2 Centering
The 3XMag-1 does not need to be zeroed. However, an Aimpoint sight used
together with the 3XMag-1 must be zeroed so the red dot of the sight creates
the correct point of impact.
The 3XMag-1 has two screws (1) that allow the user to center the red dot
of the Aimpoint sight when viewed through the 3XMag-1. Centering the dot
inside the 3XMag-1 is not necessary, but creates a more natural feel.
1. Screws for centering
Fig. 5
Centering
CAUTION:
Do not continue to adjust the screws if you encounter resistance.
