16
5.4 CHANGE REVERSE LEVER DIRECTION
1. Remove battery pack from UBX-T.
2. Remove roll pin.
3. Pull reverse lever forward to remove it.
4. Change the setting and reattach reverse lever to UBX.
5. Replace roll pin.
LED battery-level indicator colors
LED color
Battery level (%)
RED light appears immediately
after stalling, then goes out.
Less than 5%
Orange
6~40%
Green
41~100%
Red
Battery error
Fully charge a brand new battery pack before first use.
Ending battery charging prematurely can cause the LED to
incorrectly display remaining capacity. If this happens, charge
the battery fully a few times, and the LED should display correct
information.
(R)
(L)
R = Right
L = Left
(R)
(L)
Pull in this direction
Remove roll pin
Reverse lever
Battery Level Indicating LED
Squeeze trigger, and LED will indicate battery level by its color. UBX
stalls when battery level is less than 5%. LED color can change from
green to orange when pulsing.
Level indicator
light
Summary of Contents for UBX-T Series
Page 22: ...7 UBX EXPLODED VIEW ...
