AimCam PRO 2, Instruction Manual, Page: 13 / 24

Note: You can only enter record mode with a micro
SD card inserted (maximum 32GB).
Note: When using an external battery pack, connect-
ing or disconnecting the battery pack could stop your
AimCam recording.
Extended battery life with the use of external
battery power.
Your AimCam is capable of operating for an
extended period of time by using an external
battery pack (purchased separately). To use an
external battery pack use the 1 meter USB cable
provided and simply connect from the micro-USB
slot (9) to the “AimCam Reloaded” Powerbank. Go
to www.aimcam.com for a full list of accessories.
7.
Changing the video settings.
The AimCam is capable of recording full HD
1080p at 30 frames per second or at 720p at
60 frames per second. The advantage of the
higher frames per second comes when you slow
down the action to review your hits (or misses)
since the more frames per second the more
detail you are capturing. You can only adjust
these settings via the AimCam APP. The APP is
loaded with useful features and functions find
more information on the AimCam APP at www.
aimcam.com/app
8.
begin to flash to indicate AimCam is now record -
ing. Repeat this to turn off record mode and to
re-enter standby mode.
line of sight without the camera impeding
on your vision. It is advised that time is
taken here to capture the best line of sight
possible.
Once you are happy with the camera
position and angle you have found, you
can lock the camera in this position by
tightening the screw (14).
D.
To begin recording.
To start record mode please ensure your
AimCam is turned on and in standby mode (see
section 2). Now press the ON/OFF/Record button
(1) briefly once, the camera LED indicator (6) will
6.
11