Then, with the car on a level platform, connect the EVO4 to your laptop, power it up, open Race
Studio 2 and select “Device Calibration.” Select Auto Calibrate all sensors, press ok, and
Transmit. You will use Race Studio 2 for all interaction with the EVO 4 and G-Dash, you will use
SmartyManager 2 to interact with the camera and change the video background.
There is a Wizard for the Throttle Position and Steering Angle sensors that walks you through
setting the 0% to 100% setting on the throttle pot and -90 degrees (90 degrees left), center (0
degrees) and 90 degrees (90 degrees right) on the steering wheel, after you get that in. This is
accessible through the “Device Calibration” button on the left side of the splash screen for RS2.
