![background image](http://html.mh-extra.com/html/aim/rc201/rc201_user-manual_2871810017.webp)
Bluetooth Presenter RC201
16
Troubleshooting
You can’ t use the mark pen when you press and hold
You can’ t use the mark pen when you press and hold
You can’ t use the mark pen when you press and hold
You can’ t use the mark pen when you press and hold the
the
the
the
RIGHT button for more than 2 seconds
RIGHT button for more than 2 seconds
RIGHT button for more than 2 seconds
RIGHT button for more than 2 seconds
You need to run
aimMaster
aimMaster
aimMaster
aimMaster BT
BT
BT
BT
exe file before you can enable
the mark function. Then you can press and hold the RIGHT
button for more than 2 seconds to start using mark pen.
Note:
Note:
Note:
Note:
If you plan to use a computer that does not belong to you, you
need to store the
aimMaster
aimMaster
aimMaster
aimMaster BT
BT
BT
BT
exe file into a USB flash drive.
Plug it into the computer to be uses for the presentation, and
double click this exe file before the presentation.
C
C
C
Computer
omputer
omputer
omputer does
does
does
does no
no
no
notttt respon
respon
respon
respond to clicks on the pre
d to clicks on the pre
d to clicks on the pre
d to clicks on the presenter
senter
senter
senter
T
T
T
The presenter red indicator does not flash when you click the
he presenter red indicator does not flash when you click the
he presenter red indicator does not flash when you click the
he presenter red indicator does not flash when you click the
presenter
presenter
presenter
presenter buttons
buttons
buttons
buttons
The pairing is lost
The pairing is lost
The pairing is lost
The pairing is lost
Please refer to section “ Installation and Operation” and
do the
Bluetooth
®
pairing again on page 9.
The presenter ba
The presenter ba
The presenter ba
The presenter batteries run out of electricity.
tteries run out of electricity.
tteries run out of electricity.
tteries run out of electricity.
Please change a new Lithium battery CR2032.
The laser pointer is still working
The laser pointer is still working
The laser pointer is still working
The laser pointer is still working
The battery voltage might be too low although the laser
pointer is still working. Please change another new battery
CR2032.