Aim MyChron3 Dash, User Manual

Page: 10 / 14

MyChron3 Dash
User Manual
Release 1.02
www.am-sportline.com 10
1 1
4.2.1 – GPS Signal and split times setting (EVO4, EVO3 Pro/Pista with external GPS)
GPS lap timer allows to record lap/split times with no need of transmitter/receiver.
It is possible to set lap and split directly through the logger ( EVO4 , EVO3 Pro / Pista with
external GPS
1
)following the procedure explained in these pages.
Warning: setting “Use GPS Lap timer” in system configuration layer of Race Studio
Configuration – as shown here below – the logger will automatically sample lap and
split time using only the GPS lap timer and the optical receiver, also if connected, is
disabled. The below image shows EVO4 System configuration layer.
To set Lap and Split times using the GPS Laptimer:
•
set GPS lap timer in Race Studio 2 and transmit the configuration to the logger
(see Race Studio Configuration user manual for further information on AIM
loggers configuration).
•
press “VIEW” on MyChron3 Dash until “ OK SET GPS MARKER ” appears (see
below).
1
External GPS is to be connected and EVO3 Pro / Pista configuration must include an external GPS Module
as CAN expansion. See Race Studio Configuration user manual for further information about how to
configure AIM loggers and their CAN expansions.