![background image](http://html.mh-extra.com/html/aim/mychron3-dash/mychron3-dash_user-manual_2871799013.webp)
MyChron3 Dash
User Manual
Release 1.02
www.am-sportline.com
13
5
Chapter 6 – MyChron3 Dash configuration
To configure
MyChron3 Dash
:
•
run
Race Studio 2
software.
•
select the logger
MyChron3 Dash
is connected to pressing the corresponding
button on the software left vertical keyboard.
•
activate “display” layer and this window appears:
•
click on “Available displays” drop down menu and select
M3-Dash
.
The configuration window is shown here below and sets:
•
Shift lights values.
•
Channels and alarm 1 and 2 of pages 1 and 2; this means that it is possible to set
the four channels displayed (two by two) by
MyChron3 Dash
and link their Max
and Min threshold values (Max/Min cases) to two led that switches on when these
threshold values are reached.
Please note: “RPM scale”, “Split Number” and “Speed” setting (shown in data
visualization), is made through “System Configuration” layer.
Summary of Contents for MyChron3 Dash
Page 1: ...MyChron3 Dash User Manual ...