![background image](http://html1.mh-extra.com/html/aim/m10-thread/m10-thread_documentation_2871696003.webp)
Sensor documentation:
Water thermoresistor – M10” thread
– Version 1.01
3
Dimensions
Dimensions in millimeters [inches]
6.0 [0.24]
Pinout PT100 – MyChron 3 Kart
Pin Function
Pin Function
1
+ Temp. signal
3
Not connected
2 GND
4 Not
connected
1
4
3
2
4 pins Binder 719 male connector: solder termination view
Pinout PT100 – MyChron 3 Car/Bike &
Dash ST1
Pin Function
Pin Function
1
+ Temp. signal
3
Not connected
2 GND
4 Not
connected
3
2
4
1
2000
Ω
1%
4 pins Binder 719 male connector: solder termination view
Note: the PT100 thermoresistor for MyChron 3 Car/Bike/XG
and Dash ST1 is equipped with a 2 k
Ω
1% resistor between
pins number 1 and 4.
Technical characteristics
Description Value
Temperature range
From 0° to 150°C [32°
to 302°F]
Cable length
250 mm [ 9.8” ]
Note 1: the water thermocouple is supplied with a 250 mm long
cable terminated with a 4 pins male Binder 719 connector.
Note 2: extension cables are available in standard lengths and,
on request, as specified dimensions.
15.1 [0.59]
M10X1
8.0 [0.32]