![background image](http://html.mh-extra.com/html/aim/cx-jn331/cx-jn331_service-manual_2871818002.webp)
2
CX-JN331/JPK331
General
Power requirements
Mexican models:
127 V AC, 60 Hz
Other models:
120 V, 22 0 V or
230
−
240 V AC, 50/60 Hz
Adjustable with voltage
selector
110 watts
Dimensions (w/h/d) incl. projecting parts and controls
Amplifier/Tuner/Tape /CD section:
Approx. 280
×
325
×
425 mm
Power consumption
Mass
Approx. 8.3 kg
Design and specifications are subject to change
without notice.
Notes on chip component replacement
•
Never reuse a disconnected chip component.
•
Notice that the minus side of a tantalum capacitor may be
damaged by heat.
Flexible Circuit Board Repairing
•
Keep the temperature of the soldering iron around 270 ˚C
during repairing.
•
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
•
Be careful not to apply force on the conductor when soldering
or unsoldering.
This appliance is classified as a CLASS 1
LASER product.
This label is located on the rear exterior.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE
WITH MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.